Operating software Every operating program in the unit is controlled with mutual links and communications to prevent every possible error, so it introduces the maximum safety, such as input voltage warning, reverse polarity protection and Lithium cell-count input error warning. Accept various types of Lithium battery 301DX-II can accept three types of Lithium batteries – LiIo, LiPo [...]
Built in Balancer to 5S packs Banana Plug Output 2-Line LCD Display Back Lit Display – Adjustable 4 Easy to Program Buttons Includes Wiring Harness for your choice. Choose from Thunderpower, Kokam, Polyquest, and Align/E-Flight or an open ended harness to make your own. Optional Temperature sensor Operating voltage: DC 10~15 volts Nicad/Nimh: 1~14 cells Li-Ion/Poly: 1~5 series Charge Current: 0.1 to 5.0A PB/Lead Acid: [...]
The Bantam BC6-10 is a new breed of charger designed primarily for LiPo users utilising up to 6S 22.2v battery packs, which require a charger that is capable of charging high capacity packs without the wattage deficit that most field chargers experience. The BC610 offers a whooping 200 watts output that would allow a 6S [...]
Operating software Every operating program in the unit is controlled with mutual links and communications to prevent every possible error, so it introduces the maximum safety, such as input voltage warning, reverse polarity protection and Lithium cell-count input error warning. Individual voltage balancer for Lithium batteries inside BC6DC has an individual-cell-voltage balancer inside. So it does not [...]
Input power source requirement When the charger runs on its maximum power, the input power should be enough to run the charger safely and effectively. If the input voltage is lower than 11V, the charger may be shut down or limited by its circuit power. To utilize the charger’s maximum power, the input power source should [...]
With 8 cell setups becoming more common place with larger and more powerful models, chargers need to facilitate, and older 6 cell chargers just can't handle the extra voltage. This 150W BC8 charger will handle high voltages at high currents, and with its built in balancer, will balance the packs during charge, providing not only [...]
Operating software The operating program in this charger is executed with mutual links and communications with every component to prevent any possible error, so it introduces the maximum safety. Especially, the charging algorithm is so multifarious that you can select the best program to suit your requirement. And BC8DP has a large LCD for showing various information including charge/discharge [...]
Input power source requirement When the charger runs on its maximum power, the input power should be enough to run the charger safely and effectively. If the input voltage is lower than 11V, the charger may be shut down or limited by its circuit power. To utilize the charger’s maximum power, the input power source [...]
