The eLogger system comes with everything you need to log, analyse, and graph mAH, Current, Wattage, Voltage and throttle position, right out of the box. And, your eLogger is tremendously expandable, by adding additional sensors. Highlight Features: Logs pack current to +/- 100 amps (150 amps with MPRV4-LEADS-150) and voltage from about 5 volts to [...]
The eLogger system comes with everything you need to log, analyse, and graph mAH, Current, Wattage, Voltage and throttle position, right out of the box. And, your eLogger is tremendously expandable, by adding additional sensors. Highlight Features: Logs pack current to +/- 100 amps (150 amps with MPRV4-LEADS-150) and voltage from about 5 volts to [...]
The eLogger V3 from Eagle Tree Systems is an in-flight data logger which continuously records volts, amps, watts, and milliamp-hours to enable pilots to analyze the performance of their electric power systems. In addition, it supports a wide variety of optional sensors to record altitude, airspeed, component temperatures, RPM, and more. Highlight Features: Logs pack [...]
Approximately 4 foot (1 meter) resolution Reads up to approx 10,000 feet (3048 m) Above Sea Level Weight 4 grams (0.15 oz) Pre calibrated – no user calibration required Advanced Temperature Compensation Accessible static port Selectable Metric or English units 1 x Eagle Tree eLogger Altitude MicroSensor V3
The Eagle Tree 10Hz GPS Expander Module (GPS-V4) is designed to be used with all present Eagle Tree recording, OSD and wireless telemetry products. The Expander updates at 10Hz, consumes very little power, and has battery backup for quick hot and warm starts. The Expander is tiny and lightweight, making it perfect where weight and [...]
Do you fly, drive or boat with FPV, or do aerial photography? We’re pleased to introduce the Eagle Tree OSD Pro. The OSD Pro displays all the key information about your model’s status, and has many advanced features such as voice alerts, high resolution raster graphics, a new "RADAR" synthetic map, "Return to Home", Artificial [...]
With the Eagle Tree Servo Current Monitor, you can find out how much current of one or more of your servos or other low current devices are drawing. Plug into your eLogger and servo (or receiver battery/BEC) to log current from 0-5 Amps continuous, with 0.01 Amp resolution. 1 x Eagle Tree Servo Current Monitor
The EagleEyes™ FPV Station integrates four of the main components you need for FPV on the ground, at a cost that's lower than many of the individual components presently available! Receiver Diversity: When you connect two NTSC or PAL audio/video receivers (of any frequency), the EagleEyes™ picks the better signal at any given time, which [...]
Now you can connect our Power Panel lightweight LCD Display module to your eLogger! This ultra thin LCD display connects to the eLogger with the included 11" data cable, and lets you get your max and live data displayed without a PC, just like the heavier, non-logging Watt Meters on the market. The display is [...]
This sensor is compatible with the Eagle Tree MicroPower V1 / V2 / V3 E-Logger. It Measures RPM to 50K+ using a Hall Effect Sensor in combination with small magnets. You can download the eLogger Instruction manual from our site, near to the Add to cart button, for details on how to use the Hall [...]
