T-Rex 100S Super Combo RTF
Features: Utilizes AFHDS 2.4Ghz frequency hopping technology for interference avoidance and stability. Radio transmitter consist of computer simulator output compatible with 3rd party R/C airplane and helicopter simulation software, and includes an adapter cable for computer simulator. Supports MODE 1/MODE 2/ MODE 3 controller modes. Design encompasses both agility and stability characteristics. Utilizes hobby grade micro servos and reinforced frame design for flight stability, crash sustainability, and longevity. NiMh/Lipo battery charging capability, capable of charging while flying. Convenient USB charge port, allowing PC USB port or any portable 5v USB power adapters to be used for charging the transmitter NiMH battery. Charging status and power capacity display. Blue backlit LCD display panel. 5-in-1 electronics board consisting of receiver, ESC, headinglock gyro, servos, and mixing functions. High precision head assembly Model-leved micro servo Aluminum alloy main shaft and high efficiency coreless main motor High efficiency coreless tail motor AT 100 Transmitter 1.2V / 1600mAh Ni-MH Chargeable Battery 3.7V / 150mAh Li-Polymer Battery CD-ROM CH100 Lipo Charger USB Cable Simulator Cable Philips Screwdriver PH00 Illustration: (Compatible with Flight Simulator) Illustration: (Using the charging receptacle on transmitter to charge helicopter battery) Illustration: (Using the CH100 Li-Po charger to charge helicopter battery) Users must have a certain concept of security to operate the R/C helicopters.Be sure to read and comply with related safety notes of instruction manual before flying. Length: 202mm Height: 82mm Main Rotor Diameter: 192mm Tail Rotor Diameter: 36mm Weight(w/o power system): 27.8g Flying Weight: Approx 32g Align T-REX 100S Combo Align T-REX 100S Super Combo AA Battery 1.5V Carbon-Zinc Battery 1.2V / 1600mAh Ni-MH Chargeable Battery Lipo Charger CH100 Lipo Charger T-REX 100S Kit set x 1 AT 100 Transmitter x 1 3.7V / 150mAh Li-Polymer Battery x 2 1.5V Carbon-Zinc Battery x 4 Simulator Cable x 1 CD-ROM x 1 CH100 Lipo Charger x 1 USB Cable x 1 Philips Screwdriver x 1 Per Unit Gross Weight: 1,200g Dimension: 26 x 22 x 10cm